-
Four elements of perforating operation
1.Perforation density Is the number of perforations per meter of length. Under normal circumstances, to obtain the maximum production capacity requires a higher perforation density, but in the selection of perforation density, can not b...Read more -
Structure and working principle of hydraulic oscillator
The hydraulic oscillator mainly consists of three mechanical parts: 1) oscillating sub-section; 2) power part; 3) valve and bearing system. The hydraulic oscillator uses the longitudinal vibration it generates to improve the effectiv...Read more -
What are the types and advantages of tubular magnets?
There are different types of tubular magnets, each with different advantages. Here are some common types and their advantages: 1.Rare earth tubular magnets: These magnets are made of neodymium magnets and are known for their powerful ma...Read more -
The main components and operating characteristics of coiled tubing equipment.
Main components of coiled tubing equipment. 1. Drum: stores and transmits coiled tubing; 2. Injection head: provides power for lifting and lowering coiled tubing; 3. Operation room: Equipment operators monitor and control coiled tubing ...Read more -
What does downhole operation include?
07 casing repair In the middle and late stages of oilfield exploitation, with the prolongation of production time, the number of operations and workovers increases, and casing damage will occur successively. After the casing is damaged,...Read more -
Classification and selection of blowout preventer
The most important equipment to understand the performance of well control equipment, correctly install and maintain, and make the well control equipment play its due function is the blowout preventer. There are two kinds of common blow...Read more -
To our Egypt Clients
The following is Drill Line Spooler.Our clients has purchased on July. And we have arranged the shipment by air last week.They are packed in wooden boxes. ...Read more -
What problems can be encountered in process of wellhead oil production?
There are many problems that may be encountered in the process of wellhead oil production. The following are some common problems: 1.Oil well plugging: impurities such as sediments, sand grains or oil wax produced inside the oil well ma...Read more -
How to perform daily maintenance on the winch
1.Periodic inspection When the winch runs for a period of time, the running part will be worn, the connection part will be loose, the pipeline will not be smooth, and the seal will be aging. If it continues to develop, it will have a n...Read more -
What does downhole operation include ?
Handling of drill stuck accidents There are many reasons for drill sticking, so there are many types of drill sticking. The common ones are sand sticking, wax sticking, falling object sticking, casing deformation sticking, cement solidi...Read more -
The working principle and operation method of Mud Motor
1. working principle Mud motor is a positive displacement dynamic drilling tool that converts hydraulic energy into mechanical energy by using drilling fluid as power. When the pressure mud pumped by the mud pump flows into the motor, ...Read more -
What are the main considerations when fishing with a reverse circulation basket?
When using reverse circulation baskets for fishing operations, the following main items need to be paid attention to: 1.Safety first: Make sure operators using reverse circulation baskets have appropriate expertise and experience, and w...Read more
Room 703 Building B, Greenland center, Hi-tech development zone Xi’an, China
86-13609153141
