SEND INQUETY

HOME ABOUT PRODUCT NEWS CAREER CONTACT

PRODUCT SHOW

Downhole Tools Rig Support Wellhead Fracturing and Cementing equipment

Friction Reduction Tool

The friction reduction tool system relies on three main parts: -Shocking tools -Power section -Disc valve and bearing system
SEND INQUETY

Overview

The friction reduction tools itself to produce longitudinal vibration to improve weight transfer in the drilling process effectiveness and reduce the friction between the drill and hole at the bottom, this means that drilling with tool can be used in a variety of modes, particularly in power drilling directional drilling is used to imporve weight transfer, reducting the likehood of BHA sticking to reduce torsional vibration and borehole wall friction, reduce stick-slip vibration in the drilling  process, increase the penetration reate and extended bit life, and possibly guide and motor coordination, to improve control of the tools.


Technical Specification


Tool size
(OD)
Flow ratePressureOperating
frequency
Temp.
range
Max.pullMax.torqueOverall
length
Connections
('')(L/S)(Mpa)(Hz)(℃)(kN)(kN.m)(mm)
832-553.5-4.213-17≤1503220187100±56 5/8'' REG
NC56
6 3/425-37.83.5-4.213-19≤1502535157230±54 1/2'' IF
6 3/4
low pressure
25-37.82.5-3.513-19≤1502535157230±54 1/2'' IF
4 3/49.5-173.5-4.211-20≤1501156124965±53 1/2'' IF
4 3/4
low pressure
9.5-172.5-3.511-20≤1501156124965±53 1/2'' IF